I always feel that my PVC Figure is more and more damaged than others? It may be that the model maintenance is not in place! Browse below to see how to keep your PVC FIGURE maintenance and fun!

Many big friends love the collection model Figure, so Figure is definitely not a patent for children. But for a long time when the model is placed, it will inevitably occur, such as the model card ash, turning dirt, etc. It is already considered a pediatric department. It is fine to clean or wipe the Figure or wipe it. But I don’t know if you have placed Figure in a transparent box, but there are still oil on the model, and even if there are soft feet, TAT, but the model is reasonable. Intersection Intersection Intersection The whole model is not very good -looking, so what should we do?

PVC composition

PVC (Poly Vinyl Chloride) raw materials are polyvinyl chloride, which are synthesized by petrochemical and plastic. They are hollow resin and soft glue. We use PVC because Figure requires a certain degree of softness to make them durable and convenient for post -processing. Generally speaking, PVC Figure is more difficult and difficult to tear.

Model collection and placement

Personally, I like to put them in the acrylic box in the model. After buying home, you can put the model where you like it. The acrylic box is transparent and transparent, anti -ultraviolet, and there is no need to add lights, which is convenient. Of course, you can also put the model into the glass cabinet, but carefully the projection lights of the display cabinet will heat the LED light, because the strong light is the great enemy of PVC Figure. PVC Figure has been shown by strong light for a long time. The glue may become crispy and deformed, and there is also the opportunity to lift color. Therefore, PVC FIGURE cannot be shown by the sun for a long time!

PVC Figure can not only be placed under strong light, but also placed in a place where it is too high and too wet. So try not to put them on the window, terrace and other places. In the cabinet or acrylic box, it is also best to put wet bags or moisture -proof beads.


The hand sweat and fat on the person may also hurt the coating, and the nails will also scrape the Figure surface. Be careful when playing, and then be careful to wear cotton gloves.


It is best not to touch the dust in the place where you place it. Otherwise, you have to remove regularly, otherwise, the accumulation of dust will be more difficult to deal with. Don't keep sealed all the time, so as not to deteriorate the modeling pigment.

Model soft feetfirst aid

As mentioned above, high temperatures can make the model deform, so if you soak the model with warm water, Figure's PVC material will soften. Then you can manually correct the shape and shape of the model.

Model oil out of oil

Figure will produce oil because PVC products have been plasticized for a long time. You can use "neutral detergent" to remove oil. If you want to prevent oil, you can spray a layer of soft glue for transparent paint on the Figure, "temporarily" isolation of the air.

Cleaning model method

Just mentioned that Figure is best in a ventilated environment, so it is inevitable to have dust. Figure must be cleaned regularly.


The easiest way to clean the model is to wipe your models with velvet, glasses, and cotton sticks. Alcohol cotton pads are fine, but it is best to dilute, otherwise the model is afraid of coloring. Remember not to wipe the model with a dry hard cloth, it will be "hurt", leaving scratches and grooves. After all, it is a model of plastic ...

If you want to be a professional, buy a "dust ball", and some of the dustballs are also a bristles. When cleaning the camera, a lot of dust balls are used. You will sell dust balls when you go to some camera shops. It can blow out the air to blow away the dust.

If you don't want to accumulate dust again, there are some removal of electrical removal on the market. Let you clean up the dust while anti -static. Recommend to you with serious maintenance models!


If you don't want to blow the dust ball to FIGURE dust around, you can choose to use jelly to clean the glue. I prefer this method to clean the model, because it is really sticky, uneven weapons, the surface of the model, etc. Essence However, after long -term contact with cleaning glue, the poor material will have the risk of color loss.


＊ Do not use hot water and warm water to wash the model, otherwise the model may deform and melt. Unless you want "war loss" on the model, don't use warm water to wash the model while using warm water.

After absorbing so many models about models, do you also want to buy a PVC model? Come to Dimbuyshop to see if there is any suitable one!