Insta360 GO 2 transparent 45 -meter deep diving protective shell Dive case
Notice:
1) Put the anti -fog sheet into the fastener of the back side of the diving shell.
2) If you want to use a third -party anti -fog sheet, make sure that the size is within 20 x 20 x 0.5mm. If the size of the accessories is too large, it may cause water leakage and may cause the camera damage.
Notice:
When putting in the camera, please be careful not to scratch the lens.
Notice:
1) Before using the water, make sure that the diving case is closed firmly. There is no dirt or dust in the place where the diving case is in contact with its rubber sealing ring.
2) In order to achieve the best results, keep the diving shell clean, especially the GO2 lens area.
Insta360 GO 2 transparent 45 -meter deep diving protective shell Dive case
- Product SKU: ITA-GO2-DCS
- Category: Insta360 camera and accessories, Motion camera, Shooting equipment
Insta360 GO 2 diving case
Use Insta Go 2 diving case to enjoy your water journey
Original genuine goods
IPX level 8 waterproof, maximum depth 45 meters
Use GO 2 in peace in the water
How to use GO 2 diving case
1. Open the diving case
Promote lock bolts in the direction shown in the figure (1). After unlocking, take out the hook (2).
2. Install anti -fog sheet
As shown in the figure, the fascination of anti -fog sheets into the back side of the diving shell is fastened.
Notice:
1) Put the anti -fog sheet into the fastener of the back side of the diving shell.
2) If you want to use a third -party anti -fog sheet, make sure that the size is within 20 x 20 x 0.5mm. If the size of the accessories is too large, it may cause water leakage and may cause the camera damage.
3. Put the camera
Notice:
When putting in the camera, please be careful not to scratch the lens.
4. Close the diving case
When you close the submersible, please buckle the buttons on the hook of the shell, and then push it down until it emits.
Notice:
1) Before using the water, make sure that the diving case is closed firmly. There is no dirt or dust in the place where the diving case is in contact with its rubber sealing ring.
2) In order to achieve the best results, keep the diving shell clean, especially the GO2 lens area.
Specification:
Maximum waterproof depth:
45 m
Including items:
Insta360 GO 2 diving shell, anti -fog sheet, losing losses, use instructions & warranty (this document)
weight: 131 g
Insta360 GO 2 diving case
Use Insta Go 2 diving case to enjoy your water journey
Original genuine goods
IPX level 8 waterproof, maximum depth 45 meters
Use GO 2 in peace in the water
How to use GO 2 diving case
1. Open the diving case
Promote lock bolts in the direction shown in the figure (1). After unlocking, take out the hook (2).
2. Install anti -fog sheet
As shown in the figure, the fascination of anti -fog sheets into the back side of the diving shell is fastened.
Notice:
1) Put the anti -fog sheet into the fastener of the back side of the diving shell.2) If you want to use a third -party anti -fog sheet, make sure that the size is within 20 x 20 x 0.5mm. If the size of the accessories is too large, it may cause water leakage and may cause the camera damage.
3. Put the camera
Notice:
When putting in the camera, please be careful not to scratch the lens.
4. Close the diving case
When you close the submersible, please buckle the buttons on the hook of the shell, and then push it down until it emits.
Notice:
1) Before using the water, make sure that the diving case is closed firmly. There is no dirt or dust in the place where the diving case is in contact with its rubber sealing ring.
2) In order to achieve the best results, keep the diving shell clean, especially the GO2 lens area.
Specification:
Including items: Insta360 GO 2 diving shell, anti -fog sheet, losing losses, use instructions & warranty (this document)
weight: 131 g
相關產品
Sold Out
Sold Out
Sold Out
Sold Out
