Insta360 One X2 45m waterproof transparent submersible shell Dive case
Insta360 One X2
Dive Case
Insta360 One X2
Dive Case
Due to the refraction of the underwater, the spherical design of the diving shell lens is used to increase the visible angle and make the overall splicing effect better. At the same time, increaseAfter the refraction angle, the bottom of the diving shell cannot be completely hidden. Small transparent blocks will appear in the bottom of the actual shooting effect. In the actual use process, it is recommended to install the diving shell and buoyancy rod vertically to reduce the impact of small transparent blocks at the bottom of the diving shell on the picture.
Notice:
1) When putting in the anti -fog sheet, please pay attention to the corresponding circular holes and the status indicator of the camera status to avoid the camera status lights covering the anti -fog sheet.
2) If you want to use a third -party anti -fog sheet, make sure the size is within 32 x 18 x 1mm. If the size of the accessories is too large, it may cause water leakage and may cause the camera damage.
Insta360 One X2 45m waterproof transparent submersible shell Dive case
- Product SKU: ITA-X2-DCS
- Category: Insta360 camera and accessories, Motion camera, Shooting equipment
Insta360 One X2
Dive Case
Original genuine goods
Panorama shooting, explore the wonderful underwater world
Suitable for sports scenarios such as surfing, rafting and snorkeling
Due to the refraction of the underwater, the spherical design of the diving shell lens is used to increase the visible angle and make the overall splicing effect better. At the same time, increaseAfter the refraction angle, the bottom of the diving shell cannot be completely hidden. Small transparent blocks will appear in the bottom of the actual shooting effect. In the actual use process, it is recommended to install the diving shell and buoyancy rod vertically to reduce the impact of small transparent blocks at the bottom of the diving shell on the picture.
Instructions for use
1. Open the diving case
Promote the submersible shell bolt (1) in the direction shown in the figure, and remove the buckle (2). In the same way, open the lock on the other side to open the diving case.
2. Install anti -fog sheet
As shown in the figure, the anti -fog sheet is placed on both sides of the inner wall of the bottom cover of the diving shell.
Notice:
1) When putting in the anti -fog sheet, please pay attention to the corresponding circular holes and the status indicator of the camera status to avoid the camera status lights covering the anti -fog sheet.
2) If you want to use a third -party anti -fog sheet, make sure the size is within 32 x 18 x 1mm. If the size of the accessories is too large, it may cause water leakage and may cause the camera damage.
3. Put the camera
Install the bottom cover
Installation
Notice:
1) When using the water, use the lock screen function to lock the screen to prevent the screen by mistake.
2) When putting in the camera, please be careful not to scratch the lens.
4. Close the diving case
When you close the diving case, lock the hooks on both sides of the diving shell to the hanging ear, and press the lock emboli until the sound is made.
Notice:
1) Before using the water, make sure that the diving case is closed firmly. There is no dirt or dust in the place where the diving case is in contact with its rubber sealing ring.
2) In order to achieve the best results, keep the diving shell lens cleaning.
5. Install a relaxed pad
When the diving shell is connected to other accessories, a loose pad can be placed at the interface when used.
6. Stitching
After completing the shooting, connect the camera with the mobile phone, open the shooting content in the app, and select the diving shell stitching.
Specification:
size:
153.9 mm x 67.0 mm x 83.7 mm
Material:
PC
weight: 131 g
Insta360 One X2
Dive Case
Original genuine goods
Panorama shooting, explore the wonderful underwater world
Suitable for sports scenarios such as surfing, rafting and snorkeling
Due to the refraction of the underwater, the spherical design of the diving shell lens is used to increase the visible angle and make the overall splicing effect better. At the same time, increaseAfter the refraction angle, the bottom of the diving shell cannot be completely hidden. Small transparent blocks will appear in the bottom of the actual shooting effect. In the actual use process, it is recommended to install the diving shell and buoyancy rod vertically to reduce the impact of small transparent blocks at the bottom of the diving shell on the picture.
Instructions for use
1. Open the diving case
Promote the submersible shell bolt (1) in the direction shown in the figure, and remove the buckle (2). In the same way, open the lock on the other side to open the diving case.
2. Install anti -fog sheet
As shown in the figure, the anti -fog sheet is placed on both sides of the inner wall of the bottom cover of the diving shell.
Notice:
1) When putting in the anti -fog sheet, please pay attention to the corresponding circular holes and the status indicator of the camera status to avoid the camera status lights covering the anti -fog sheet.2) If you want to use a third -party anti -fog sheet, make sure the size is within 32 x 18 x 1mm. If the size of the accessories is too large, it may cause water leakage and may cause the camera damage.
3. Put the camera
Install the bottom cover
Installation
4. Close the diving case
When you close the diving case, lock the hooks on both sides of the diving shell to the hanging ear, and press the lock emboli until the sound is made.
5. Install a relaxed pad
When the diving shell is connected to other accessories, a loose pad can be placed at the interface when used.
6. Stitching
After completing the shooting, connect the camera with the mobile phone, open the shooting content in the app, and select the diving shell stitching.
Specification:
Material: PC
weight: 131 g
相關產品
HK$300.00
HK$339.00
HK$3,900.00
HK$3,999.00
HK$2,400.00
HK$3,200.00
HK$248.00
HK$279.00
HK$59.00
HK$159.00
